MINI MCR-SL-UI-REL (PHOENIX CONTACT)
Преобразователь сигнала, Ток, Напряжение, Реле, 1 канал(-ов), 24 В DC
The MINI MCR-SL-UI-REL is a MCR Limit Value Switch with adjustable hysteresis and delay time, with screw connection. The 6.2mm wide configurable 3-way threshold value switch MINI MCR-SL-UI-REL is used to control and monitor analogue standard signals. On the input side, the analogue standards signals 0 to 20mA or 0 to 10V per DIP switch can be set. On the output side, a relay with PDT contact is available. The switching thresholds are set via potentiometer. The relay status is indicated by a yellow LED on the front of the housing. Power (19.2 to 30VDC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector.
- 3-way isolation
- Configuration of the switching hysteresis
- Configuration of the operating and closed circuit current behaviour
- Setting of relay pickup times
- Setting of dropout delay
- Power supply possible via the foot element (TBUS)
- Highly-compact threshold value switch for switching analogue limit values
- Status and error indication via two diagnostic LEDs
- Operating current/closed circuit current switch-over
- PDT relay at output
- Limit value can be freely adjusted via potentiometer on the front
- Input signal, hysteresis and delay time can be configured via DIP switches
Области применения
Тестирование и Измерение
Вход Изоляции:
-
Вход Формирователя Сигнала:
Ток, Напряжение
Выход Формирователя Сигнала:
Реле
Количество Выходных Каналов:
1канал(-ов)
Количество Каналов:
-
Линейка Продукции:
-
Монтаж Формирователя Сигнала:
DIN-рейка
Напряжение Питания:
24В DC
Точность %:
-
Точность Выхода:
-
SVHC (Особо Опасные Вещества):
No SVHC (15-Jan-2018)
RoHS статус:
Да