SN74AHCT245DW (TEXAS INSTRUMENTS)
Приемопередатчик, неинвертирующий, 3 состояния, 4.5В до 5.5В, SOIC-20
The SN74AHCT245DW is an octal Bus Transceiver with 3-state outputs. It is designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements. The SNx4AHCT245 device allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses effectively are isolated. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver.
- Inputs are TTL-voltage compatible
- VCC is optimized at 5V
- Allows up voltage translation from 3.3 to 5V - Inputs accept VIH levels of 2V
- Slow edge rates minimize output ringing
- Latch-up performance exceeds 250mA per JESD 17
- Green product and no Sb/Br
Области применения
Промышленное, Связь и Сеть, Компьютеры и Периферия, Медицинское, Потребительская Электроника
Базовый Номер / Семейство Логики:
74AHCT245
Базовый Номер Микросхемы Логики:
74245
Количество Выводов:
20вывод(-ов)
Линейка Продукции:
-
Максимальная Рабочая Температура:
85°C
Максимальное Напряжение Питания:
5.5В
Минимальная Рабочая Температура:
-40°C
Минимальное Напряжение Питания:
4.5В
Семейство Логической Микросхемы:
74AHCT
Соответствует Фталатам RoHS:
Да
Стандарты Автомобильной Промышленности:
-
Стиль Корпуса Микросхемы Логики:
SOIC
Тип Логического Устройства:
Приемопередатчик, Неинвертирующий
SVHC (Особо Опасные Вещества):
No SVHC (27-Jun-2018)
RoHS статус:
Да