PTCCL07H111HBE (VISHAY)
Термистор с ПТК, 48Ом, THT, 265В, -20% до +20%, PTCCL серия
The PTCCL series PTC Thermistor for overload protection. This directly heated ceramic-based thermistor has a positive temperature coefficient and is primarily intended for overload protection. It consists of a ceramic pellet soldered between two tinned CCS wires and coated with UL94V-0 high temperature hard silicone lacquer. PTC thermistor can be mounted by wave, reflow or hand-soldering. Current levels have been determined according IEC 60738 conditions. Different ways of mounting or connecting the thermistors can influence their thermal and electrical behaviour. Standard operation is in still air, any potting or encapsulation of PTC thermistor is not recommended and will change its operating characteristics.
- Wide range of trip and non-trip currents from 11 to 800mA
- Small ratio between trip and non-trip currents (It/Int = 1.5 at 25°C)
- High maximum inrush current (up to 5.5A)
- Leaded parts withstand mechanical stresses and vibration
- UL file E148885 according to XGPU standard UL1434
Области применения
Безопасность, Промышленное, Потребительская Электроника
Линейка Продукции:
Серия PTCCL
Максимальная Рабочая Температура:
70°C
Максимальное Рабочее Напряжение:
265В
Минимальная Рабочая Температура:
0°C
Монтаж Термистора:
Сквозное Отверстие
Применения:
Защита от Перегрузки и Перегрева
Стандарты Автомобильной Промышленности:
-
Статическое Сопротивление при 25°C:
48Ом
SVHC (Особо Опасные Вещества):
To Be Advised
RoHS статус:
Да
