DS1804U-100+ (MAXIM INTEGRATED PRODUCTS)
Энергонезависимый цифровой потенциометр, подстроечное устройство, 100 кОм, Одиночный
The DS1804U-100+ is a non-volatile trimmer potentiometer in 8 pin µSOP package. The device provides an ideal method for low cost trimming applications using a CPU or manual control input with minimal external circuitry. Wiper position of the DS1804 can be stored in EEPROM memory and its position is manipulated by a three terminal port that provides an increment/decrement counter controlled interface. This port consists of the control inputs active-low CS, active-low INC and U/active-low D. On power-up, the DS1804 will load the value of EEPROM memory into the wiper position register or (1 of 100decoder). On power-down, the wiper position register data will be lost.
- Supply voltage range from 2.7V to 5.5V
- Operating temperature range from -40°C to 85°C
- Single 100 position taper potentiometer
- Up/down, increment controlled interface
- Non-volatile on demand wiper storage
- Specified to accept 50,000 writes to EEPROM over 0°C to 70°C
- End to end resistance is 100Kohm at ±20% tolerance and temperature coefficient is 750ppm/°C
- Power-up time is 50ms
- Easily used as an OTP (one time programmability) device
Области применения
Обработка Сигнала
Допуск Сопротивления:
± 20%
Интерфейс Контроля:
Увеличение Уменьшение
Количество Выводов:
8вывод(-ов)
Количество Потенциометров:
Одиночный
Количество Шагов:
100
Линейка Продукции:
Single 100-Tap Non-Volatile Digital Pots
Линейность Дорожки:
Линейный
Максимальная Рабочая Температура:
85°C
Максимальное Напряжение Питания:
5.5В
Минимальная Рабочая Температура:
-40°C
Минимальное Напряжение Питания:
2.7В
Полное Сопротивление:
100кОм
Соответствует Фталатам RoHS:
Будет Указано Позже
Стандарты Автомобильной Промышленности:
-
Стиль Корпуса Микросхемы Потенциометра:
µSOP
Температурный Коэффициент:
750млн-1/°C
SVHC (Особо Опасные Вещества):
No SVHC (15-Jan-2018)
RoHS статус:
Да