SN75ALS176P (TEXAS INSTRUMENTS)
Приемопередатчик шины, 2 канала, 60мА, 4.75В до 5.25В, DIP-8
The SN75ALS176P is a differential Bus Transceiver is designed for bidirectional data communication on multipoint bus transmission lines. For balanced transmission lines and meet TIA/EIA-422-B, TIA/EIA-485-A and ITU recommendations V.11 and X.27. The SN75ALS176 series combine a 3-state, differential line driver and a differential input line receiver, both of which operate from a single 5V power supply. The driver and receiver have active-high and active-low enables, respectively, that can be connected together externally to function as a direction control. The driver differential outputs and the receiver differential inputs are connected internally to form a differential input/output (I/O) bus port that is designed to offer minimum loading to the bus when the driver is disabled or VCC = 0. This port features wide positive and negative common-mode voltage ranges, making the device suitable for party-line applications.
- Operate at data rates up to 35Mbaud
- Designed for multipoint transmission on long bus lines in noisy environments
- Wide positive and negative input or output bus-voltage range
- Thermal shutdown protection
- Driver positive and negative current limiting
- Receiver input hysteresis
- Glitch-free power-up and power-down protection
- Receiver has open-circuit, fail-safe design
Области применения
Промышленное
Количество Выводов:
8вывод(-ов)
Количество Каналов:
2канал(-ов)
Линейка Продукции:
-
Максимальная Рабочая Температура:
70°C
Максимальное Напряжение Питания:
5.25В
Минимальная Рабочая Температура:
0°C
Минимальное Напряжение Питания:
4.75В
Соответствует Фталатам RoHS:
Да
Стиль Корпуса Микросхемы Логики:
DIP
Тип Логики:
Приемопередатчик Шины
Уровень Входа:
2В
SVHC (Особо Опасные Вещества):
No SVHC (27-Jun-2018)
RoHS статус:
Да
Выходные параметры
Выходной Ток:
60мА