MR8008B (ELECTROLUBE)
Лак, изолирующий, полиуретан, прозрачный/янтарный, банка, 250мл
Before coating, ensure boards are clean. If required, the varnish may be thinned prior to application. To achieve an even coating, use a slow steady withdrawal from the bath. If the PCB has a number of large components then a draining step in the dipping cycle may be necessary. Altering the speed of withdrawal from the bath will vary the thickness of the varnish applied, i.e. a slow withdrawal gives a thinner coat. If a thick coat is desired, this may be achieved by double dipping. Do not use at temperatures above 30°C, unless in a well-ventilated area with suitable respiratory equipment.
- 0.90g/ml at 20°C Density
- 5-hour at 25°C Initial Drying Time
- 48-hour at 25°C Complete Cure
- Formulated with UV Trace to Allow Instant Inspection
Области применения
Промышленное
Вес:
-
Линейка Продукции:
-
Метод Дозирования:
Банка
Объем:
250мл
Применения Покрытия:
Печатные Платы, Трансформаторы
Тип Покрытия:
Лак
Цвет Покрытия:
Янтарный
SVHC (Особо Опасные Вещества):
No SVHC (20-Jun-2016)
RoHS статус:
Да