MICROSTACK BASE BOARD (MICROSTACK)
Дополнительная плата, основная плат Microstack™, для Raspberry Pi, библиотека Microstack™ Python
The Microstack baseboard for Raspberry Pi brings the world of Microstack modules to the amazing world of Raspberry Pi. This baseboard can be used with Raspberry Pi model A and B and the newer A+ and B+ versions. It routes the appropriate GPIO pins of the Raspberry Pi to sockets to connect Microstack modules. The onboard 3.3V regulator makes enough current available to power a stack of Microstack modules, separate from the limited 3.3V supply on the Raspberry Pi. The 5V supply to the regulator and some Microstack modules can either be supplied from the Raspberry Pi or via an additional, onboard 5V microusb socket. The unique multi colour PCB and polarised sockets help ensure the correct modules are fitted in the correct orientation in the correct socket.
- Fully supported with Microstack Node Python Library
- Quick to get started on Raspberry Pi with simple to install drivers
- Unique colour coded PCB for simplicity
- Onboard 3.3V power regulator takes the load of the Raspberry Pi's 3.3 volt power rail
Области применения
Встроенные Конструкции и Разработка
Примечания
Если Microstack получает питание через его разъем microusb, то для предотвращения подачи питания в Raspberry Pi необходимо удалить перемычку.
Предупреждения
ESD sensitive device. Precaution should be used when handling the device in order to prevent permanent damage.
Архитектура Ядра:
ARM
Для Использования с:
Совместимыми с Raspberry Pi 2 моделями B, Raspberry Pi B+/A+/B/A
Линейка Продукции:
-
Название Семейства Чипа:
BCM2xxx
Номер Ядра Чипа:
BCM2835
Подархитектура Ядра:
ARM11
Производитель Чипа:
Broadcom
Содержимое Комплекта:
Дополнительная плата адаптера
SVHC (Особо Опасные Вещества):
To Be Advised
RoHS статус:
Да