B57211P0409M301 (EPCOS)

F2101616
нет данных
 
Термистор, ICL NTC, дисковый, 4Ом, -20% до +20%, радиальные выводы, B57211P0 серия

Документация
Technical Data Sheet EN
Product Change Notice EN

БрендEPCOS НаименованиеB57211P0409M301 Цена заШтука (Поставляется на разрезной ленте) Страна производстваAustria СкладFarnell

Термистор, ICL NTC, дисковый, 4Ом, -20% до +20%, радиальные выводы, B57211P0 серия

The B57211P0409M301 is a 2-pin NTC Thermistor with kinked leads of tinned copper wire and black coated thermistor disk. This B57211P0 series thermistor is marked with manufacturer's logo, NTC and resistance value stamped on. A lead (wire) may be bent at a minimum distance of twice the wire's diameter plus 4mm from the component head or housing. When bending ensure the wire is mechanically relieved at the component head or housing. The bending radius should be at least 0.75mm. Twisting (torsion) by 180° of a lead bent by 90° is permissible at 6mm from the bottom of the thermistor body. Soldering can use resin-type flux or non-activated flux. The soldering due to insufficient preheating may cause ceramic cracks. Suitable for inrush current limiting and peripheral communication equipment.
  • 7.5mm Lead spacing
  • High stability of electrical characteristic
  • Bending radius should be at least 0.75mm
  • 3W Maximum power
  • UL94V-0 Flammability rating

Области применения

Безопасность, Связь и Сеть

Примечания

Самонагрев термистора во время работы зависит от нагрузки и коэффициента рассеивания. Рекомендуется использование перчаток

Предупреждения

Avoid contamination of thermistors surface during storage, handling and processing. Do not touch components with bare hands. Washing process may damage due to possible static/cyclic mechanical loads.
Линейка Продукции:
Серия B57211P0
Максимальное Энергопотребление при 25°C:
-
Органы Утверждения и Согласования:
UL
Размеры Диска:
13мм
Статическое Сопротивление при 25°C:
4Ом
Тип упаковки:
Разрезная лента
SVHC (Особо Опасные Вещества):
No SVHC (27-Jun-2018)
RoHS статус:
Да