FLUKE-721EX-1603 (FLUKE)

F2563347
нет данных
 
Калибратор, два датчика, 16/300 PSIG, Давление, 200 мм, 110 мм, 58 мм, 0.025%, 539 г

Документация
Technical Data Sheet EN

БрендFLUKE НаименованиеFLUKE-721EX-1603 Цена заШтука Страна производстваUnited States СкладFarnell

Калибратор, два датчика, 16/300 PSIG, Давление, 200 мм, 110 мм, 58 мм, 0.025%, 539 г

The FLUKE-721EX-1603 is a precision pressure calibrator with dual isolated sensors for gas custody transfer applications. This dual isolated pressure sensor allows to take simultaneous static and differential pressure measurements in single tool. The pressure calibrator is simple to use and versatile, the two internal pressure sensors are configured with different pressure measurement ranges. One range for lower pressure and one range for higher pressure. Display has two main regions, one is menu bar (located at the bottom of the screen) used with the function buttons to access product menu and second is main display which has a maximum of three process measurement sub-regions as upper, middle and lower displays i.e. large backlit graphic display up to three inputs simultaneously.
  • Low pressure sensor range from -14psi to +16psi, 0.001psi resolution & 0.025% full scale accuracy
  • High pressure sensor range from -12psi to +300psi, 0.01psi resolution & 0.025% full scale accuracy
  • 4 standard AA cells battery with life greater than 35hr
  • 6VDC power requirements
  • Switch test on both pressure inputs
  • Pressure displayed in the user's choice of 19 engineering units
  • Store five instrument setups for recall and use
  • Intrinsically safe IECEx and Atex Ex ia IIB T3 Gb (Zone 1) rated
  • Dimensions is 20cm x 11cm x 5.8cm (H x W x D)
  • IP-40 ingress protection

Области применения

Тестирование и Измерение

Содержание

Dual sensor pressure calibrator, Soft case, Four (4) AA batteries, Manual, Traceable calibration certificate, Test leads.

Предупреждения

To prevent possible personal injury, check entity parameters before making any connections to device.
Вес:
539г
Внешняя Ширина:
110мм
Высота Внешней Стороны:
200мм
Глубина Внешней Части:
58мм
Линейка Продукции:
721EX Series
Максимальная Рабочая Температура:
45°C
Минимальная Рабочая Температура:
-10°C
Тип Калибровки:
Давление
Точность:
0.025%
SVHC (Особо Опасные Вещества):
No SVHC (15-Jun-2015)
Популярные товары