CT2 (TEKTRONIX)
Токовый пробник, SMA Гнездо, Заземляющий Штырь, 36 А, Осциллографами Tektronix
The CT2 from Tektronix is an AC current probe. It is designed for permanent or semi-permanent in-circuit installation. The probe consists of a current transformer and an interconnecting cable. The current transformers have a small hole through which a current carrying conductor is passed during circuit assembly. The P6041 probe cable provides the connection between CT2 Current Transformers and a BNC oscilloscope input. A 50 ohm termination is required to terminate the cable when connected to a high-impedance (1Mohm) oscilloscope input. One probe cable can be used to monitor several current transformers that have been wired into a circuit. Typical applications include data storage read channel design, silicon characterization, high-frequency analogue design, ESD testing, signal injection, differential current measurements, single-shot low rep-rate pulse measurements and propagation delay measurements.
- Typical bandwidth is 25KHz to 1GHz
- Rise time is 350ps, sensitivity (into 50 ohm) is 5mV/mA, accuracy is ±3%
- Magnetizing inductance is 6µH, leakage inductance is 2.4nH, insertion impedance is 2ohm at 100MHz
- Maximum bare wire size is 14AWG
- Maximum bare wire voltage is 175VRMS CAT I
- Maximum peak pulse current is 12A
- Propagation delay is 5.4ns
- Fits into dense, closely-spaced circuit designs
- UL3111-2-032, CSA1010.2.032, EN61010-2-032, IEC61010-2-032 safety standards
Боковой Разъем Измерительного Прибора:
SMA Гнездо
Боковой Разъем Пробника:
Заземляющий Штырь
Для Использования с:
Осциллографами Tektronix
Линейка Продукции:
-
Максимальный Диапазон Тока:
36А
Минимальный Диапазон Тока:
-
SVHC (Особо Опасные Вещества):
No SVHC (12-Jan-2017)
RoHS статус:
Да