AMC1200STDUBRQ1 (TEXAS INSTRUMENTS)

F2496176
нет данных
 
Разделительный усилитель, 1 Усилитель, 200 мкВ, 4 кВ, 2.7В до 5.5В, 4.5В до 5.5В, SOP, 8 вывод(-ов)

Документация
Technical Data Sheet EN
Product Change Notice EN
  Simulation Model EN

БрендTEXAS INSTRUMENTS НаименованиеAMC1200STDUBRQ1 Цена заШтука Страна производстваUnited States СкладFarnell

Разделительный усилитель, 1 Усилитель, 200 мкВ, 4 кВ, 2.7В до 5.5В, 4.5В до 5.5В, SOP, 8 вывод(-ов)

The AMC1200STDUBRQ1 is a fully-differential precision Isolation Amplifier with the output separated from the input circuitry by a silicon dioxide (SiO2) barrier that is highly resistant to magnetic interference. This barrier is certified to provide galvanic isolation of up to 4250Vp according to UL1577 and VDE V 0884-10. Used in conjunction with isolated power supplies, this device prevents noise currents on a high common-mode voltage line from entering the local ground and interfering with or damaging sensitive circuitry. The input of the AMC1200-Q1 is optimized for direct connection to shunt resistors or other low-voltage level signal sources. The performance of the device supports accurate current control, resulting in system level power saving and (especially in motor-control applications) lower torque ripple. The common-mode voltage of the output signal is automatically adjusted to either the 3 or 5V low-side supply.
  • ±250mV Input voltage range optimized for shunt resistors
  • 0.075% at 5V Maximum very low nonlinearity
  • 1.5mV Maximum low offset error
  • 3.1mV RMS Typical low noise
  • 8mA at 5V Maximum low high-side supply current
  • 108dB High common-mode rejection ratio
  • 3.3V Low-side operation
  • 5100V Isolation voltage pulse/test peak
  • 0.015% Maximum gain non-linearity
  • Green product and no Sb/Br

Области применения

Измерительное, Тестирование и Измерение

Диапазон Напряжения Питания:
2.7В до 5.5В, 4.5В до 5.5В
Количество Выводов:
8вывод(-ов)
Количество Усилителей:
1 Усилитель
Линейка Продукции:
-
Максимальная Рабочая Температура:
105°C
Максимальное Нелинейное Усиление:
0.1%
Минимальная Рабочая Температура:
-40°C
Напряжение Входного Смещения:
200мкВ
Напряжение Изоляции:
4кВ
Полоса Пропускания:
100кГц
Соответствует Фталатам RoHS:
Да
Стиль Корпуса Усилителя:
SOP
SVHC (Особо Опасные Вещества):
No SVHC (27-Jun-2018)
RoHS статус:
Да
Популярные товары