OPA692IDBVTG4 (TEXAS INSTRUMENTS)

F1207072
нет данных
 
Буферный усилитель, 1 усилитель(-ей), 280 МГц, 2100 В/мкс, ± 2.5В до ± 6В, SOT-23, 6 вывод(-ов)

Документация
Technical Data Sheet EN
Technical Data Sheet EN
  Simulation Model EN

БрендTEXAS INSTRUMENTS НаименованиеOPA692IDBVTG4 Цена заШтука (Поставляется на разрезной ленте) Страна производстваUnited States СкладFarnell

Буферный усилитель, 1 усилитель(-ей), 280 МГц, 2100 В/мкс, ± 2.5В до ± 6В, SOT-23, 6 вывод(-ов)

The OPA692IDBVTG4 is a wideband fixed gain Buffer Amplifier with disable function. Depending on the external connections, the internal resistor network may be used to provide either a fixed gain of +2 video buffer or a gain of +1 or -1 voltage buffer. Operating on a very low 5.1mA supply current, the OPA692 offers a slew rate and output power normally associated with a much higher supply current. A new output stage architecture delivers high output current with a minimal headroom and crossover distortion. This gives exceptional single-supply operation. Using a single +5V supply, the OPA692 can deliver a 1 to 4V output swing with over 120mA drive current and >200MHz bandwidth. This combination of features makes the OPA692 an ideal RGB line driver or single-supply analog-to-digital converter (ADC) input driver. The low 5.1mA supply current for the OPA692 is precisely trimmed at +25°C.
  • Easy-to-use
  • 150µA Low disabled current
  • ±4.0V Output voltage swing
  • Green product and no Sb/Br

Области применения

Визуализация, Видео и Зрение, Обработка Сигнала, Переносные Устройства, Промышленное

Выход Усилителя:
Несимметричный
Диапазон Напряжения Питания:
± 2.5В до ± 6В
Количество Выводов:
6вывод(-ов)
Количество Усилителей:
1усилитель(-ей)
Линейка Продукции:
-
Максимальная Рабочая Температура:
85°C
Минимальная Рабочая Температура:
-40°C
Скорость Нарастания:
2100В/мкс
Соответствует Фталатам RoHS:
Да
Стиль Корпуса Усилителя:
SOT-23
Тип упаковки:
Разрезная лента
Ширина Полосы Усиления:
280МГц
SVHC (Особо Опасные Вещества):
No SVHC (27-Jun-2018)
RoHS статус:
Да
Выходные параметры
Выходной Ток:
190мА