MAX1320ECM+ (MAXIM INTEGRATED PRODUCTS)

F2513253
нет данных
 
АЦП, 14 бит, 526 Квыборок/с, Несимметричный, Параллельный, Однополярный, 4.75 В

Документация
Technical Data Sheet EN

БрендMAXIM INTEGRATED PRODUCTS НаименованиеMAX1320ECM+ Цена заШтука Страна производстваUnited States СкладFarnell

АЦП, 14 бит, 526 Квыборок/с, Несимметричный, Параллельный, Однополярный, 4.75 В

The MAX1320ECM+ is an 8-channel, 14bit, simultaneous sampling analogue to digital converter (ADC) with ±5V analogue input range in 48 pin LQFP package. The independent track/hold circuitry provides simultaneous sampling for each channel. It has ±16.5V fault tolerant inputs. This ADC converts two channels in 2µs, up to eight channels in 3.8µs and has an 8-channel throughput of 250Ksps per channel. It also includes 10MHz T/H input bandwidth, internal clock, internal (+2.5V) or external (2V to 3V) reference and power saving modes. A 16.6MHz, 14bit bidirectional parallel interface provides conversion results and accepts digital configuration inputs. The MAX1320 operates from 4.75V to 5.25V analogue supply, separate 2.7V to 5.25V digital supply and consume less than 50mA total supply current. The device has small signal bandwidth of 10MHz and full power bandwidth of 10MHz. It is used in power grid synchronization, power factor monitoring and correction, vibration & waveform analysis.
  • 14bit, high speed parallel interface
  • Operating temperature range from -40°C to 85°C
  • Offset error of ±40LSB (unipolar devices), ±40LSB (bipolar devices) and gain error of ±8LSB
  • ±0.8LSB INL and ±0.5LSB DNL (no missing codes)
  • 90dBc SFDR, -86dBc THD, 76.5dB SINAD and 77dB SNR at 100KHz input
  • 46mA analogue supply current, 1mA digital supply current
  • On-chip T/H circuit for each channel, 10ns aperture delay and 50ps channel to channel T/H matching
  • Fast conversion time of 1.6µs (1-channel), 1.9µs (2-channel), 2.5µs (4-channel) & 3.7µs (8-channel)
  • High throughput rate of 526Ksps/ch for one channel
  • No calibration needed

Области применения

Обработка Сигнала, Привод Двигателя и Управление

Интерфейс Данных:
Параллельный
Количество Выводов:
48вывод(-ов)
Линейка Продукции:
Octal 14-Bit SAR ADCs
Максимальная Рабочая Температура:
85°C
Максимальное Напряжение Питания:
5.25В
Минимальная Рабочая Температура:
-40°C
Минимальное Напряжение Питания:
4.75В
Разрешение (бит):
14бит
Соответствует Фталатам RoHS:
Будет Указано Позже
Стандарты Автомобильной Промышленности:
-
Стиль Корпуса АЦП / ЦАП:
LQFP
Тип Входного Канала:
Несимметричный
Тип Напряжения Питания:
Однополярный
Частота Выборки:
526Квыборок/с
SVHC (Особо Опасные Вещества):
No SVHC (15-Jan-2018)
RoHS статус:
Да