L9958XP (STMICROELECTRONICS)
Привод двигателя, полумостовой, 4.5В до 5.5В питание, 8.6А/1 выход, PowerSSO-24
The L9958XP is a SPI-controlled H-bridge Driver designed for the control of DC and stepper motors in safety critical applications and under extreme environmental conditions. The H-bridge is protected against over-temperature, short-circuits and has an under-voltage lockout for all the supply voltages Vs and Vdd and for over-voltage on Vdd. All malfunctions causes the output stages to go tristate. Detailed failure diagnostics on each channel is provided via SPI - short-circuit to battery, short-circuit to ground, short-circuit overload, over-temperature. Open-load can be detected in on condition, for the widest application ranges. Current regulation threshold can be set by SPI from 2.5 to 8.6A (typical), in 4 steps. Guaranteed accuracy is ±10% on all temperature range, using an external reference resistor with 1% accuracy over all temp range. Current limitation threshold is linearly reduced by temperature over 165°C and a thermal warning bit is set by SPI.
- All pins withstand 19V, Vs and output pins withstand 40V
- Full path Ron from 100 (at Tj=-40°C) to 300mR (at Tj=150°C)
- Logic inputs TTL/CMOS-compatible
- Operating frequency up to 20kHz
- 16-bit SPI interface for configuration/diagnostics, daisy chain capability
- Over-temperature and short-circuit protection
- VS under-voltage disable function
- VDD under-voltage and over-voltage protection
- VDD over-voltage detection
- Open-load detection in on condition
- Full diagnostics in OFF-state
- Enable and disable input
- Low standby current (<10µA)
- Voltage and current slew-rate control for low EMI, programmable through SPI
- 4 to 28V Operating battery supply voltage
Области применения
Привод Двигателя и Управление
Предупреждения
Market demand for this product has caused an extension in lead times, delivery dates may fluctuate
Выходное Напряжение:
-
Количество Выводов:
24вывод(-ов)
Количество Выходов:
1выход(-ов)
Линейка Продукции:
-
Максимальная Рабочая Температура:
125°C
Максимальное Напряжение Питания:
5.5В
Минимальная Рабочая Температура:
-40°C
Минимальное Напряжение Питания:
4.5В
Соответствует Фталатам RoHS:
Да
Стандарты Автомобильной Промышленности:
-
Стиль Корпуса Привода:
PowerSSO
Тип Мотора:
Мостовая Схема Управления
SVHC (Особо Опасные Вещества):
No SVHC (17-Dec-2015)
RoHS статус:
Да
Выходные параметры
Выходной Ток:
8.6А