LPC11E14FBD48/401, (NXP)

F2094287
нет данных
 
Микроконтроллер ARM, LPC Family LPC1100 Series Microcontrollers, ARM Cortex-M0, 32бита, 50 МГц

Документация
CAD CadSoft_EAGLE EN

БрендNXP НаименованиеLPC11E14FBD48/401, Цена заШтука Страна производстваTaiwan СкладFarnell

Микроконтроллер ARM, LPC Family LPC1100 Series Microcontrollers, ARM Cortex-M0, 32бита, 50 МГц

The LPC11E14FBD48/401 is a 32-bit Microcontroller based on ARM Cortex-M0 core with RISC architecture operates at a maximum frequency of 50MHz. The device incorporates 32kB internal flash, 10kB internal RAM, 4kB EEPROM, four general-purpose counters/timers, 8-channel 10-bit A/D converter with sample rates of up to 400ksps and 40 general-purpose I/O pins. This device also features peripherals like one RS-485/EIA-485 USART with support for synchronous mode and smart card interface and one inter-integrated circuit (I2C).
  • ARM Cortex-M0 built-in nested vectored interrupt controller (NVIC)
  • Non-maskable interrupt (NMI) input selectable from several input sources
  • System tick timer
  • 16KB Boot ROM including 32-bit integer divide routines and power profiles
  • In-system programming (ISP) and In-application programming (IAP)
  • Standard JTAG test interface for BSDL
  • Serial wire debug
  • Up to 8 GPIO pins can be selected as edge and level sensitive interrupt sources
  • Two GPIO grouped interrupt modules
  • High-current source output driver (20mA) on one pin
  • High-current sink driver (20mA) on true open-drain pins
  • Programmable windowed watchdog timer (WWDT)
  • 10-bit ADC with input multiplexing among eight pins
  • Two SSP controllers with FIFO and multi-protocol capabilities
  • Crystal oscillator with an operating range of 1MHz to 25MHz
  • 12MHz High-frequency Internal RC oscillator (IRC)
  • Internal low-power, low-frequency watchdog oscillator (WDO)
  • PLL allows CPU operation up to the maximum CPU rate
  • Clock output function with divider
  • Integrated PMU (power management unit)

Области применения

Потребительская Электроника, Автоматизация и Управление Процессами, Медицинское, Промышленное

Архитектура:
ARM Cortex-M0
Количество I/O:
40I/O
Количество Бит:
32бита
Количество Выводов:
48вывод(-ов)
Линейка Продукции:
LPC Family LPC1100 Series Microcontrollers
Максимальное Напряжение Питания:
3.6В
Минимальное Напряжение Питания:
1.8В
Размер Памяти:
32КБ
Размер Памяти RAM:
10КБ
Семейство Микроконтроллера:
LPC
Серия Микроконтроллера:
LPC1100
Скорость ЦПУ:
50МГц
Соответствует Фталатам RoHS:
Да
Стиль Корпуса Микроконтроллера:
LQFP
Тип Встроенного Интерфейса:
I2C, SSP, USART, USB
SVHC (Особо Опасные Вещества):
No SVHC (27-Jun-2018)
RoHS статус:
Да
Популярные товары