SN74ACT1073DW (TEXAS INSTRUMENTS)

F1740134
нет данных
 
16-битный массив согласования шины с функцией удержания, 4.5В до 5.5В, SOIC-20

Документация
Technical Data Sheet EN
Product Change Notice EN

БрендTEXAS INSTRUMENTS НаименованиеSN74ACT1073DW Цена заШтука Страна производстваMalaysia СкладFarnell

16-битный массив согласования шины с функцией удержания, 4.5В до 5.5В, SOIC-20

The SN74ACT1073DW is a 16-bit Bus Termination Network with bus hold function. It is designed to terminate bus lines in CMOS systems. The integrated low-impedance diodes clamp the voltage of undershoots and overshoots caused by line reflections and ensure signal integrity. The device also contains a bus-hold function that consists of a CMOS-buffer stage with a high-resistance feedback path between its output and its input. The SN74ACT1073 prevents bus lines from floating without using pull-up or pull-down resistors. The high-impedance inputs of these internal buffers are connected to the input terminals of the device. The feedback path on each internal buffer stage keeps a bus line tied to the bus holder at the last valid logic state generated by an active driver before the bus switches to the high-impedance state.
  • Designed to ensure defined voltage levels on floating bus lines in CMOS systems
  • Reduces undershoot and overshoot caused by line reflections
  • Inputs are TTL-voltage compatible
  • Low power consumption
  • Center-pin VCC and GND configuration minimizes high-speed switching noise
  • 100mA Repetitive peak forward current
  • Green product and no Sb/Br

Области применения

Связь и Сеть, Промышленное

Количество Выводов:
20вывод(-ов)
Линейка Продукции:
-
Максимальная Рабочая Температура:
85°C
Максимальное Напряжение Питания:
5.5В
Минимальная Рабочая Температура:
-40°C
Минимальное Напряжение Питания:
4.5В
Соответствует Фталатам RoHS:
Да
Стиль Корпуса Микросхемы Логики:
SOIC
Тип Логики:
Массив Оконченной Шины с Функцией Удержания Шины
SVHC (Особо Опасные Вещества):
No SVHC (27-Jun-2018)
RoHS статус:
Да