PCA9306DCUT (TEXAS INSTRUMENTS)

F1053573
нет данных
 
Транслятор уровня, двунаправленный, 1.5нс, 1.2В до 7В, US8-8

Документация
Technical Data Sheet EN
Technical Data Sheet EN
  Simulation Model EN
CAD CadSoft_EAGLE EN
  Simulation Model EN
Product Change Notice EN

БрендTEXAS INSTRUMENTS НаименованиеPCA9306DCUT Цена заШтука (Поставляется на разрезной ленте) Страна производстваUnited States СкладFarnell

Транслятор уровня, двунаправленный, 1.5нс, 1.2В до 7В, US8-8

The PCA9306DCUTE4 is a dual bidirectional I?C and SMBus Voltage-level Translator with an enable (EN) input, is operational from 1.2 to 3.3V VREF1 and 1.8 to 5.5V VREF2. The PCA9306DCUTE4 allows bidirectional voltage translations between 1.2 and 5V, without the use of a direction pin. The low ON-state resistance (RON) of the switch allows connections to be made with minimal propagation delay. When EN is high, the translator switch is ON and the SCL1 and SDA1 I/O are connected to the SCL2 and SDA2 I/O, respectively, allowing bidirectional data flow between ports. When EN is low, the translator switch is off and a high-impedance state exists between ports. In addition to voltage translation, the PCA9306 can be used to isolate a 400kHz bus from a 100kHz by controlling the EN pin.
  • 2-bit Bidirectional translator for SDA and SCL lines in mixed-mode I?C applications
  • I?C and SMBus compatible
  • <1.5ns Maximum propagation delay to accommodate standard and fast-mode I?C devices/multiple masters
  • Provides bidirectional voltage translation with no direction pin
  • Low 3.5R ON-state connection between input and output ports provides less signal distortion
  • Open-drain I?C I/O ports (SCL1, SDA1, SCL2 and SDA2)
  • 5V Tolerant I?C I/O ports to support mixed-mode signal operation
  • High-impedance SCL1, SDA1, SCL2 and SDA2 pins for EN = low
  • Lock-up-free operation for isolation when EN = low
  • Flow-through pinout for ease of printed circuit board trace routing
  • Latch-up performance exceeds 100mA per JESD 78, class II
  • Green product and no Sb/Br

Области применения

Связь и Сеть, Компьютеры и Периферия, Промышленное, Автоматизация и Управление Процессами

Предупреждения

Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
Задержка Распространения:
1.5нс
Количество Входов:
2
Количество Выводов:
8вывод(-ов)
Линейка Продукции:
-
Максимальная Рабочая Температура:
85°C
Максимальное Напряжение Питания:
Минимальная Рабочая Температура:
-40°C
Минимальное Напряжение Питания:
1.2В
Соответствует Фталатам RoHS:
Да
Стандарты Автомобильной Промышленности:
-
Стиль Корпуса Микросхемы Логики:
VSSOP
Тип Логики:
Уровневый Транслятор Напряжения
Тип упаковки:
Разрезная лента
SVHC (Особо Опасные Вещества):
No SVHC (27-Jun-2018)
RoHS статус:
Да
Выходные параметры
Выходной Ток:
64мА
Популярные товары