DSPIC30F4013-30I/PT (MICROCHIP)
Контроллер Цифровых Сигналов, Серия dsPIC30F, 120 МГц, 48 КБ, 30 I/O, CAN, I2C, SPI, UART, 5.5 В
The DSPIC30F4013-30I/PT is a 16-bit high-performance Digital Signal Controller with seamless migration options from this device to dsPIC33F and PIC24 devices. The CPU core has a 24-bit instruction word. The Program Counter (PC) is 23-bit wide with the least significant bit (LSb) always clear and the most significant bit (MSb) is ignored during normal program execution, except for certain specialized instructions. Thus, the PC can address up to 4M instruction words of user program space. An instruction prefetch mechanism is used to help maintain throughput. Program loop constructs, free from loop count management overhead, are supported using the DO and REPEAT instructions, both of which are interruptible at any point.
- Modified Harvard architecture
- C-compiler optimized instruction set architecture
- 84 base instructions with flexible addressing modes
- 16-bit Wide data path
- 16 x 16-bit working register array modes
- DSP engine - Modulo and bit-reversed addressing modes
- 12-bit 200kSPS analogue-to-digital converter (A/D)
- A/D conversion during sleep and idle
- Enhanced flash program memory - 10,000 erase/write cycle (minimum)
- Data EEPROM memory - 100000 erase/write cycle (minimum)
- Self-reprogrammable under software control
- Power-on reset (POR), power-up timer (PWRT) and oscillator start-up timer (OST)
- Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator for reliable operation
- Fail-safe clock monitor operation
- Detects clock failure and switches to on-chip low power RC oscillator
- Programmable code protection
- In-Circuit Serial Programming™ (ICSP™)
- Programmable brown-out detection and reset generation
- Selectable power management modes - Sleep, idle and alternate clock modes
- Low power, high speed CMOS flash technology
Области применения
Промышленное, Управление Питанием, Привод Двигателя и Управление, Авто
Предупреждения
Market demand for this product has caused an extension in lead times, delivery dates may fluctuate
Количество I/O:
30I/O
Количество Выводов:
44вывод(-ов)
Линейка Продукции:
Серия dsPIC30F
Максимальная Рабочая Температура:
85°C
Максимальное Напряжение Питания:
5.5В
Минимальная Рабочая Температура:
-40°C
Минимальное Напряжение Питания:
2.5В
Напряжение Питания Ядра:
5.5В
Размер Флэш-памяти:
48КБ
Соответствует Фталатам RoHS:
Да
Стандарты Автомобильной Промышленности:
AEC-Q100
Стиль Корпуса Контроллера Цифровых Сигналов:
TQFP
Тип Встроенного Интерфейса:
CAN, I2C, SPI, UART
Частота Ядра:
120МГц
SVHC (Особо Опасные Вещества):
No SVHC (27-Jun-2018)
RoHS статус:
Да
