SN65HVD233DG4 (TEXAS INSTRUMENTS)

F1207268
нет данных
 
CAN шина, приемопередатчик, CAN, 1, 1, 3 В, 3.6 В, SOIC

Документация
Technical Data Sheet EN
CAD CadSoft_EAGLE EN

БрендTEXAS INSTRUMENTS НаименованиеSN65HVD233DG4 Цена заШтука Страна производстваMexico СкладFarnell

CAN шина, приемопередатчик, CAN, 1, 1, 3 В, 3.6 В, SOIC

The SN65HVD233DG4 is a CAN (Controller Area Network) transceiver with standby and loopback mode in 8 pin SOIC package. This CAN transceiver is used in applications employing CAN serial communication physical layer in accordance with the ISO 11898-2 standard. The SN65HVD233 provides transmit and receive capability between differential CAN bus and CAN controller with signalling rates up to 1Mbps. The SN65HVD233 features cross wire protection, overvoltage protection up to ±36V, loss of ground protection, overtemperature (thermal shutdown) protection and common mode transient protection of ±100V. The device operates over a wide -7V to 12V common mode range. The SN65HVD233 enter a low current standby mode during which the driver is switched off and receiver remains active if a high logic level is applied to the RS pin. A logic high on loopback (LBK) pin (pin 5) of SN65HVD233 places bus output and bus input in a high impedance state.
  • Single 3.3V supply voltage
  • Bus pins fault protection exceeds ±36V
  • Bus pin ESD protection exceeds ±16KV HBM
  • GIFT/ICT compliant
  • High input impedance allows for 120 nodes
  • Adjustable driver transition times for improved emissions performance
  • Unpowered node does not disturb bus
  • Low current standby mode of typically 200µA
  • Operating temperature range -40°C to 125°C
  • LVTTL I/Os are 5V tolerant

Области применения

Авто, Промышленное, Автоматизация и Управление Процессами, Считывание и Контрольно-измерительная Аппаратура, Привод Двигателя и Управление, Робототехника, Связь и Сеть

Предупреждения

This device has limited built-in ESD protection. The leads should be shorted together or device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
Количество RX Буферов:
1
Количество Буферов TX:
1
Количество Выводов:
8вывод(-ов)
Линейка Продукции:
-
Максимальная Рабочая Температура:
125°C
Максимальное Напряжение Питания:
3.6В
Минимальная Рабочая Температура:
-40°C
Минимальное Напряжение Питания:
Соответствует Фталатам RoHS:
Да
Стандарты Автомобильной Промышленности:
-
Стиль Корпуса Интерфейса:
SOIC
Тип Интерфейса ИС:
CAN
SVHC (Особо Опасные Вещества):
No SVHC (27-Jun-2018)
RoHS статус:
Да