MAX13051ESA+ (MAXIM INTEGRATED PRODUCTS)

F2517373
нет данных
 
CAN шина, CAN, 1, 1, 4.75 В, 5.25 В, NSOIC

Документация
Technical Data Sheet EN

БрендMAXIM INTEGRATED PRODUCTS НаименованиеMAX13051ESA+ Цена заШтука Страна производстваUnited States СкладFarnell

CAN шина, CAN, 1, 1, 4.75 В, 5.25 В, NSOIC

The MAX13051ESA+ is a ±80V fault-protected CAN transceiver with autobaud in 8 pin NSOIC package. It provides a link between the CAN protocol controller and the physical wires of the bus lines in a control area network (CAN). It features three different modes of operation namely high speed, slope control and standby. High speed mode allows data rates up to 1Mbps. The slope-control mode can be used to program slew rate of the transmitter for data rates of up to 500Kbps, reduces the effects of EMI and allows to use unshielded twisted or parallel cable. In standby mode, the transmitter shuts off and a low-power receiver monitors the bus, waiting for a wake-up signal. It provides an autobaud feature allowing microcontroller to compute incoming baud rate without destroying CAN protocol communication. It is used in telecom, HVAC and device net nodes.
  • Supply voltage range is 4.75V to 5.25V
  • Operating temperature range from -40°C to 85°C
  • Fully compatible with the ISO 11898 standard
  • Short circuit protection
  • Thermal shutdown
  • Transmit data dominant timeout
  • ±6KV human body model ESD protection
  • Greater than ±12V common-mode range

Области применения

Связь и Сеть, Промышленное

Количество RX Буферов:
1
Количество Буферов TX:
1
Количество Выводов:
8вывод(-ов)
Линейка Продукции:
-
Максимальная Рабочая Температура:
85°C
Максимальное Напряжение Питания:
5.25В
Минимальная Рабочая Температура:
-40°C
Минимальное Напряжение Питания:
4.75В
Соответствует Фталатам RoHS:
Будет Указано Позже
Стандарты Автомобильной Промышленности:
-
Стиль Корпуса Интерфейса:
NSOIC
Тип Интерфейса ИС:
CAN
SVHC (Особо Опасные Вещества):
No SVHC (15-Jan-2018)
RoHS статус:
Да