PCAL9538ABSHP (NXP)

F2428172
нет данных
 
Расширитель I/O, 8бит, 400 кГц, I2C, 1.65 В, 5.5 В, HVQFN

Документация
Technical Data Sheet EN

БрендNXP НаименованиеPCAL9538ABSHP Цена заШтука (Поставляется на разрезной ленте) Страна производстваMalaysia СкладFarnell

Расширитель I/O, 8бит, 400 кГц, I2C, 1.65 В, 5.5 В, HVQFN

The PCAL9538ABSHP is an 8-bit Input/output (GPIO) Expander with interrupt and reset for I?C-bus/SMBus applications. The NXP I/O expander provides a simple solution when additional I/Os are needed while keeping interconnections to a minimum. In addition to providing a flexible set of GPIOs, the wide VDD range of 1.65 to 5.5V allows the PCAL9538A to interface with next-generation microprocessors and microcontrollers where supply levels are dropping down to conserve power. The expander contains the PCA9538A register set of four 8-bit configuration, input, output and polarity inversion registers and additionally, it has Agile I/O, which are additional features specifically designed to enhance the I/O. The additional features includes programmable output drive strength, latchable inputs, programmable pull-up/pull-down resistors, maskable interrupt, interrupt status register, programmable open-drain or push-pull outputs.
  • Low standby current consumption
  • Schmitt-trigger action allows slow input transition and better switching noise immunity
  • Open-drain active LOW interrupt output (INT)
  • Internal power-ON reset
  • Power-up with all channels configured as inputs
  • No glitch on power-up
  • Latched outputs with 25mA drive maximum capability for directly driving LEDs
  • Latch-up performance exceeds 100 mA per JESD 78, class II
  • Bank selectable push-pull or open-drain output stages
  • Read-only register identifies the source of an interrupt
  • Input port register values changes are kept until the input port register is read
  • Floating input or pull-up/pull-down resistor enable
  • Mask prevents the generation of the interrupt when input changes state
  • 100kR Pull-up/down resistor

Области применения

Связь и Сеть, Считывание и Контрольно-измерительная Аппаратура, Управление Питанием

Количество I/O:
8I/O
Количество Выводов:
16вывод(-ов)
Конфигурация Чипа:
8бит
Линейка Продукции:
-
Максимальное Напряжение Питания:
5.5В
Минимальное Напряжение Питания:
1.65В
Соответствует Фталатам RoHS:
Да
Стандарты Автомобильной Промышленности:
-
Стиль Корпуса Интерфейса:
HVQFN
Тип Интерфейса ИС:
I2C
Тип упаковки:
Разрезная лента
Частота Шины:
400кГц
SVHC (Особо Опасные Вещества):
No SVHC (27-Jun-2018)
RoHS статус:
Да