MCP23S18-E/MJ (MICROCHIP)

F1854492
нет данных
 
Расширитель I/O, AEC-Q100, 16бит, 3.4 МГц, I2C, Последовательный, SPI, 1.8 В, 5.5 В, QFN

Документация
Technical Data Sheet EN
Product Change Notice EN

БрендMICROCHIP НаименованиеMCP23S18-E/MJ Цена заШтука Страна производстваUnited States СкладFarnell

Расширитель I/O, AEC-Q100, 16бит, 3.4 МГц, I2C, Последовательный, SPI, 1.8 В, 5.5 В, QFN

The MCP23S18-E/MJ is a 16-bit I/O Expander for high speed SPI™ compatible interface. The MCP23X18 device provides 16-bit, general purpose parallel I/O expansion for I?C bus or SPI applications. The two devices differ only in the serial interface. The MCP23X18 consists of multiple 8-bit configuration registers for input, output and polarity selection. The system master can enable the I/Os as either inputs or outputs by writing the I/O configuration bits. The data for each input or output is kept in the corresponding input or output register. The polarity of the input port register can be inverted with the polarity inversion register. All registers can be read by the system master. The 16-bit I/O port functionally consists of two 8-bit ports (PORTA and PORTB).
  • Low standby current as low as 1µA
  • High-speed I?C™ interface up to 3.4MHz
  • Single hardware address pin, voltage input to allow up to eight devices on the bus
  • Configurable interrupt output pins - Configurable as active-high, active-low or open-drain
  • 1µA Typical low standby current

Области применения

Промышленное, Авто

Предупреждения

Market demand for this product has caused an extension in lead times, delivery dates may fluctuate
Количество I/O:
16I/O
Количество Выводов:
24вывод(-ов)
Конфигурация Чипа:
16бит
Линейка Продукции:
-
Максимальное Напряжение Питания:
5.5В
Минимальное Напряжение Питания:
1.8В
Соответствует Фталатам RoHS:
Да
Стандарты Автомобильной Промышленности:
AEC-Q100
Стиль Корпуса Интерфейса:
QFN
Тип Интерфейса ИС:
I2C, Последовательный, SPI
Частота Шины:
3.4МГц
SVHC (Особо Опасные Вещества):
No SVHC (27-Jun-2018)
RoHS статус:
Да