MCP23009-E/MG (MICROCHIP)
Расширитель I/O, 8бит, 3.4 МГц, I2C, Последовательный, SPI, 1.8 В, 5.5 В, QFN
The MCP23009-E/MG is an 8-bit I/O Expander with I?C™ compatible interface operating at speeds of up to 3.4MHz. The MCP23X09 device provides 8-bit, general purpose parallel I/O expansion for I?C bus or SPI applications. The MCP23X09 consists of multiple 8-bit configuration registers for input, output and polarity selection. The system master can enable the I/Os as either inputs or outputs by writing the I/O configuration bits. The data for each input or output is kept in the corresponding input or output register. The polarity of the input port register can be inverted with the polarity inversion register. All registers can be read by the system master.
- Low standby current as low as 1 µA
- High-speed I?C™ interface
- Single hardware address pin, voltage input to allow up to eight devices on the bus
- Configurable interrupt output pins - Configurable as active-high, active-low or open-drain
- Configurable interrupt source - Interrupt-on-change from configured defaults or pin change
- Polarity inversion register to configure the polarity of the input port data
- External reset input
Области применения
Промышленное
Предупреждения
ESD sensitive device, take proper precaution while handling the device.
Количество I/O:
9I/O
Количество Выводов:
16вывод(-ов)
Конфигурация Чипа:
8бит
Линейка Продукции:
-
Максимальное Напряжение Питания:
5.5В
Минимальное Напряжение Питания:
1.8В
Соответствует Фталатам RoHS:
Да
Стандарты Автомобильной Промышленности:
-
Стиль Корпуса Интерфейса:
QFN
Тип Интерфейса ИС:
I2C, Последовательный, SPI
Частота Шины:
3.4МГц
SVHC (Особо Опасные Вещества):
No SVHC (27-Jun-2018)
RoHS статус:
Да