SN65LBC176D (TEXAS INSTRUMENTS)

F1212853
нет данных
 
Драйвер дифференциального приемопередатчик RS485, питание 4.75В-5.25В, SOIC-8

Документация
Technical Data Sheet EN
Product Change Notice EN
CAD CadSoft_EAGLE EN

БрендTEXAS INSTRUMENTS НаименованиеSN65LBC176D Страна производстваMexico СкладFarnell

Драйвер дифференциального приемопередатчик RS485, питание 4.75В-5.25В, SOIC-8

The SN65LBC176D is a monolithic differential Bus Transceiver designed for bidirectional data communication on multipoint bus-transmission lines. It is designed for balanced transmission lines and meets ANSI standard TIA/EIA-485-A (RS-485) and ISO 8482:1987(E). It combines a 3-state, differential line driver and a differential input line receiver, both of which operate from a single 5V power supply. The driver and receiver have active-high and active-low enables, respectively, which can externally connect together to function as a direction control. The driver differential outputs and the receiver differential inputs connect internally to form a differential input/output (I/O) bus port that is designed to offer minimum loading to the bus whenever the driver is disabled or VCC=0. This port features wide positive and negative common-mode voltage ranges, making the device suitable for party-line applications.
  • Very low device supply current can be achieved by disabling the driver and the receiver
  • High-speed low-Power LinBiCMOS™ circuitry
  • Designed for high-speed operation in both serial and parallel applications
  • Low skew
  • Designed for multi-point bus transmission on long bus lines in noisy environments
  • Wide positive and negative input/output bus voltage ranges
  • Thermal-shutdown protection
  • Driver positive-and negative-current limiting
  • Open-circuit failsafe receiver design
  • Glitch-free power-up and power-down protection
  • 200µA Maximum very low disabled supply current
  • ±200mV Maximum receiver input sensitivity
  • 50mV Typical receiver input hysteresis
  • Green product and no Sb/Br

Области применения

Авто, Промышленное, Привод Двигателя и Управление, Автоматизация Зданий, Измерительное, Управление Питанием, Охрана

Количество Выводов:
8вывод(-ов)
Количество Приводов:
1драйвер(-ов)
Количество Приемников:
1Receivers
Линейка Продукции:
-
Максимальная Рабочая Температура:
85°C
Максимальное Напряжение Питания:
5.25В
Минимальная Рабочая Температура:
-40°C
Минимальное Напряжение Питания:
4.75В
Соответствует Фталатам RoHS:
Да
Стандарты Автомобильной Промышленности:
-
Стиль Корпуса Привода:
SOIC
Тип Интерфейса ИС:
RS485
Тип Устройства:
Дифференциальный Приемопередатчик
SVHC (Особо Опасные Вещества):
No SVHC (27-Jun-2018)
RoHS статус:
Да
Популярные товары