SN65LVDS048AD (TEXAS INSTRUMENTS)

F8452369
нет данных
 
Дифференциальный драйвер линии, Да

Документация
Technical Data Sheet EN
Product Change Notice EN
CAD CadSoft_EAGLE EN

БрендTEXAS INSTRUMENTS НаименованиеSN65LVDS048AD Цена заШтука Страна производстваTaiwan СкладFarnell

Дифференциальный драйвер линии, Да

The SN65LVDS048AD is a quad differential Line Receiver implements the electrical characteristics of low-voltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5V differential standard levels (such as EIA/TIA-422B) to reduce the power, increase the switching speeds and allow operation with a 3.3V supply rail. Any of the quad differential receivers will provide a valid logical output state with a ±100mV differential input voltage within the input common-mode voltage range. The input common-mode voltage range allows 1V of ground potential difference between two LVDS nodes. The intended application of this device and signaling technique is for point-to-point baseband data transmission over controlled impedance media of approximately 100R. The transmission media may be printed-circuit board traces, backplanes or cables.
  • Flow-through pin-out simplifies PCB layout
  • High impedance LVDS inputs on power-down
  • Low-power dissipation (40mW at 3.3V static)
  • Accepts small swing (350mV) differential signal levels
  • Supports open, short and terminated input failsafe
  • Conforms to TIA/EIA-644 LVDS standard
  • >400Mbps (200MHz) Signalling rate
  • 50ps Typical channel-to-channel skew
  • 200ps Typical differential skew
  • 2.7ns Typical propagation delay time
  • 3.3V Power supply design
  • Green product and no Sb/Br

Области применения

Обработка Сигнала, Промышленное

Количество Приводов:
-
Линейка Продукции:
-
Соответствует Фталатам RoHS:
Да
Тип Интерфейса ИС:
-
SVHC (Особо Опасные Вещества):
No SVHC (27-Jun-2018)
RoHS статус:
Да