5 CF SA (IDEAL-TEK)

F3480501
нет данных
 
Пинцет, прецизионный, 130мм, корпус из нержавеющей стали, наконечник из углеволокна

Документация
Technical Data Sheet EN

БрендIDEAL-TEK Наименование5 CF SA Цена заШтука Страна производстваSwitzerland СкладFarnell

Пинцет, прецизионный, 130мм, корпус из нержавеющей стали, наконечник из углеволокна

The 5 CF SA is a Precision Tweezer made of anti-magnetic anti-acid stainless steel body with ESD Carbofib (CF) tips. It is good chemical resistance (oils, grease, fuels and non polar solvents), not resistant to strong acids, alkalis and hot water or steam. It contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements. It is suitable for use in electronic industry, watch-makers, jewellers and laboratory and medical applications in moderately aggressive chemical environments.
  • Heat stabilized
  • Very high rigidity, excellent tensile and flexural strength, fatigue and creep resistance
  • Low friction, self lubricating properties, excellent wear and abrasion resistance
  • Good heat capability
  • ESD safe material, (avoid powder attraction, sparks generation, ignition sources)
  • Very low coefficient of linear thermal expansion
  • Non-magnetisable
  • Good corrosion resistance to most chemicals, salts and acids
  • Generally used where corrosion resistance and toughness are primary requirements
  • Annealed state
  • 8g/cm? Density
  • 40% Elongation, break
  • 200GPa Modulus of elasticity

Области применения

Промышленное, Медицинское, Потребительская Электроника

Линейка Продукции:
-
Материал Кончиков Пинцета:
Пластик
Материал Корпуса Пинцета:
Нержавеющая Сталь
Общая Длина:
130мм
Тип / Стиль Наконечника Пинцета:
-
Тип Пинцета:
-
SVHC (Особо Опасные Вещества):
No SVHC (12-Jan-2017)
Популярные товары