SN74LVC2T45DCUR (TEXAS INSTRUMENTS)

F2437250
нет данных
 
Приемопередатчик по шине, LVC семейство, 2 входа, 50мА, 3.9нс, 1.65В до 5.5В, VSSOP-8

Документация
Technical Data Sheet EN

БрендTEXAS INSTRUMENTS НаименованиеSN74LVC2T45DCUR Страна производстваJapan СкладFarnell

Приемопередатчик по шине, LVC семейство, 2 входа, 50мА, 3.9нс, 1.65В до 5.5В, VSSOP-8

The SN74LVC2T45DCUR is a 2-bit non-inverting Bus Transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 to 5.5V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 to 5.5V. This allows for universal low-voltage bidirectional translation between any of the 1.8, 2.5, 3.3 and 5 voltage nodes. The SN74LVC2T45 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic high or low level applied to prevent excess ICC and ICCZ.
  • DIR Input circuit referenced to VCCA
  • Low power consumption
  • Ioff Supports partial-power-down mode operation
  • Latch-up performance exceeds 100mA per JESD, 78 class II
  • ±24mA Output drive at 3.3V

Области применения

Промышленное, Радиочастотная Связь, Потребительская Электроника

Задержка Распространения:
3.9нс
Количество Входов:
2
Количество Выводов:
8вывод(-ов)
Линейка Продукции:
-
Максимальная Рабочая Температура:
85°C
Максимальное Напряжение Питания:
5.5В
Минимальная Рабочая Температура:
-40°C
Минимальное Напряжение Питания:
1.65В
Соответствует Фталатам RoHS:
Да
Стандарты Автомобильной Промышленности:
-
Стиль Корпуса Микросхемы Логики:
VSSOP
Тип Логики:
Приемопередатчик Шины
Тип упаковки:
Катушка
SVHC (Особо Опасные Вещества):
No SVHC (27-Jun-2018)
RoHS статус:
Да
Выходные параметры
Выходной Ток:
50мА
Популярные товары